This custom product is an excellent way to add a Mediterranean look to any opening without demolition, the need for precision cutting equipment or carpentry skills! Meant to be used on finished walls, just add them to your walls using construction adhesive and then cover them on all surfaces with joint compound so that they blend into your walls seamlessly. Add some texture (if your walls have this) and paint, and that’s it!
This kit comes with one complete arch set.
INTENDED FOR INDOOR PROJECTS ONLY
The steps below detail the measuring process. You will need to measure both the doorway opening dimensions and also the wall thickness. These steps are best illustrated in the images above.
To measure the doorway opening:
- Measure the Doorway Opening at the top of the door frame. Be exact, down to the nearest 1/8 inch.
- Note what your actual measurement was in your order note.
To measure the wall thickness:
- Measure the thickness of your wall on each side.
- Record the smallest measurement you find from both sides. (to the nearest 1/8 inch)
- Deduct 1/8 inch from that measurement. (This will allow room for joint compound to be added to the arches in order to blend them into your walls)
- If you can’t deduct, just tell me and I will do it.
- Submit the single smallest measurement.
- Ask me a questions if you are unsure about your measurements. I respond immediately.
- Refer to the images for more info. We do not offer refunds or exchanges if incorrect measurements were provided.
- Make sure your corners are 90 degrees! These products are exactly 90 degrees at the corners, so if your corners are not accurate, then additional installation steps will be required by you. Reach out with any questions. If your walls are very off, I can do a custom order for certain applications.
Reviews
There are no reviews yet.